TPM 054
Version 1.0, May 30, 2016
Page | 2
INTRODUCTION
Configuration Utility Manual
INTRODUCTION
This manual provides information specific to the Titan Gateway Configuration Utility application
(hereafter referred to as the Configuration Utility) only.
This manual describes use of the Configuration Utility as part of the Gateway System, together with the
TD80 and Finch II systems. For complete installation and programming details on the Gateway and the
TD80 Level Gauging System, refer the Gateway Installation and Operation manual (TPM 053), TD80
product manual (TPM 001) and Finch II product manual (TPM 010).
This guide is intended to assist the user on the installation, use, and maintenance, of the Titan Gateway,
under normal working conditions. Operations outside the scope of this guide or specialized installations,
will require further documentation. Please contact your nearest Titan Logix service facility with your
requirements.
It is essential that this manual be read and understood for proper installation and operation of your
Gateway Configuration Utility software.
Please see our Terms and Conditions for details about our product warranty.
DISCLAIMER
The information in this document is subject to change without notice. Titan Logix Corp. makes no
representations or warranties with respect to the contents hereof.
PROPRIETARY INFORMATION
The Information disclosed herein contains proprietary rights of Titan Logix Corp. Neither this document
nor the information disclosed herein shall be reproduced or transferred to other documents, or used or
disclosed to others for manufacturing purposes, or for any other purpose except as specifically
authorized in writing by Titan Logix Corp.
