TIPTIG Hot Wire Unit, Technical Manual

Page: 58 / 63

MILLER MAXSTAR 350 / DYNASTY 350
BASIC SETTINGS
POLARITY (DC) - Steel Alloys, Stainless Steel, Nickel, Copper, Titanium
(AC) - Aluminum, Magnesium
PROCESS - TIG HF IMPULSE is the standard selection for High Frequency Starts
OUTPUT - RMT 2T HOLD – is used in replace of a foot pedal to engage and hold
the arc while welding.
AMP -
Main Amperage Set
INERT GAS USED
- 100% Argon used with a regular at 30-40 CF for most
welding.
ADVANCED SETTINGS
PULSER
– Not Recommended.
SEQUENCER
- The TIP TIG Process does not require a foot pedal. The Sequencer
settings is where you can control your start and stop settings in replace of the
foot pedal.
INITIAL AMPERAGE (AMP VALUE)
INITIAL SLOPE TIME (TIME VALUE)
FINAL SLOPE TIME (TIME VALUE)
FINAL AMPERAGE (AMP VALUE)
GAS/DIG -
PreFlow and PostFlow provide shielding before and after the starts
and stops and are set in seconds.
54
Setting Power Source for the TIP TIG Process
SECTION XVIII