TIPTIG Hot Wire Unit, Technical Manual

Page: 50 / 63

Handheld / Fixed Torch Instruction Guide
Insert the two parts together
2
Identify the Tungsten Collet (left) and
the Electrode Case (Right).
1
Insert the Inner Collet as per Tungsten Size
into the electrode case.
3
NOTE: Inner Collets NOT USED on Handheld torch
Insert the Tungsten into the
Electrode Case, adjust stick out
and tighten Electrode Case.
4
Install the ring insulator and the ring onto
the torch shaft.
(you need to remove the steel stud on ring)
5
Install the Nozzle Insulator and the
Gas Lens on the torch.
Screw in tight.
6
46
SECTION XII