TIPTEL Ergophone 6160, User Manual

Page: 12 / 60

12
Charging the battery
A charger and a power supply unit are supplied
with your phone.
Insert the small connector on the
power supply unit into the jack on
the rear of the charger cradle. The
side of the connector with the USB
logo must be facing the top side of
the charger cradle. If it is not easy to insert the con-
nector into the jack, check the direction and avoid
applying force. Then plug the power supply unit in-
to the socket.
Place the telephone in its closed position in the
charger; the battery now charges.
Instead of charging via the charger cradle, the
power supply plug can also be connected directly
to the jack on the side of the telephone. The battery
can also be charged via a computer's USB con-
nector. In both cases, the USB logo on the con-
nector must be facing the front of the phone.
Battery performance diminishes over time. If you
notice after a time that you need to recharge your
phone more frequently, replace the battery.
For safety reasons, the battery switches off be-
fore it is totally discharged. If you have not used
the telephone for a long time, wait up to 10