Settings
82
My number
Area ............................
Enter your area code here
Number
...................... If you enter your own call number your tiptel 540 SD
announces this call number for internal OGM texts.
Remote control
...................... >>
Access code
............... The access code is a 1 to 4 digit number between 0
and 9999. Remote control is switched off using the "
– " code.
Quick check
................ If you want to access the remote control quickly
without having to enter the access code you can for
example enter your mobile phone call number here.
If this call number is detected for a call the device
starts remote control immediately.
Toll-saver
.................... Yes or no. If you select "Yes" and there are new
ICMs your tiptel 540 SD answers calls after two ring-
ing tones (no matter the number of ringing tones
set). If there are no new ICMs the device only an-
swers the calls after the number of ringing tones set
in the "Ringing tones" option. So before accepting
the call you already know whether there are new
ICMs and whether remote control is worthwhile.
Remote on/off
............ Yes or no. You set whether the answering mode
should be activated remotely or not.
Remote delete
............ Yes or no. You can set here whether the "Delete
ICMs remotely" option is activated or not.
Room monitoring
....... Yes or no. You set whether the "room monitoring"
should be activated or not.
Message code
....................... The message code is a 1 to 4 digit number between
0 and 9999. The message function is switched off
using the " – " code.
Redial
..................................... Every 5 to 60 seconds. You can set the pause be-
tween the dialling attempts for automatic redialling
here.
Call-back code
...................... You enter the call-back code of your network opera-
tor (for Deutsche Telekom network e.g. H*37#).
