TIPTEL 540 SD Manual Download

Page: 69 / 104

Call forwarding

Press menu.

The main menu is displayed.

Search for the "Call forwarding"
entry using the control buttons
(up/down).

Press the selection button next to
"Call forwarding".

The call forwarding menu is shown in the
display.

Press the selection button next to
the setting that you wish to change.

The cursor is located at the entry point.

Select the desired entry location
using the control buttons (left/right)
and change it with the control but-
tons (up/down).

The display shows the current setting.

When entering the target call num-
ber set the first digit using the con-
trol buttons (up/down).

Digits and special symbols are displayed.
The special symbols have the following
meanings:
~  = Wait for dial tone / 3 Sec. pause
i  = Internal (for PABX)
F  = Flash (short, for PABX)
H  = Hook flash (long, for PABX)

Summary of Contents for 540 SD









































































































Search results

Summary of Contents for 540 SD

Reviews:

Related manuals for 540 SD

Brands by name

Popular brands

TIPTEL 540 SD, Manual

Search results

Summary of Contents for 540 SD

Reviews:

Related manuals for 540 SD

Brands by name

Popular brands