Planning and installation
62
Connecting the telephone system to the external telephone lines
Plug in the western plug of the external telephone line 1 in the corresponding western jack on
the right and the one for line 2 in the corresponding western jack on the left hand side. And then
connect those cable with the wall outlets connected to the telephone network of your telephone
company.
Connecting the telephone system to mains power
The telephone system has been designed for connection to mains power of
230V+6%/-10%, 50Hz. Use the system's AC adapter to connect it to mains power.
You will hear a short click and the LED "power" will light and indicate readiness for
operation.
Functional test
After installing all terminal units and cables it is recommended to perform a functional
test. Pick up one telephone after the other and listen for the dialling signal. Dial the
numbers of the other extensions and verify that they do ring. Also you should check
the voice connection. Dial
for external line access and check for the external line
dialling signal. In case you two external lines installed check the dialling signal with
both of them.
External line 2
External line 1
