Configuration and settings
50
Set duration of door opener actuation
The duration of the door opener actuation can be programmed between 1 and
9 seconds. Programming can be carried out via telephone 21 according to the
table below. In the factory default settings this duration is programmed as 3
seconds.
Set duration
Example: The duration shall be set to 5 seconds.
1. Telephone 21: Pick up handset
You will hear the internal calling signal.
2. Dial code number
.
Activate the programming level. You hear the
acknowledge signal.
3. Dial code number
.
You hear the acknowledge signal..
By dialling the door opener code number 6 the
door opener will be actuated for 5 seconds.
4. Hang up.
Programming is done.
Actuation
duration 1s 2s 3s 4s 5s 6s 7s 8s 9s
61 62 63 64 65 66 67 68 69
Set direct access to door intercom system
Somebody rings the door bell. All authorised telephones will ring in the door
bell rhythm. If you pick up a telephone for which the direct access has been
activated you will immediately be connected with the door intercom system.
Dialling the code number 5 for accessing the door intercom system is not
necessary.
If you connect an answering machine as extension with direct access activated
you can e.g. have automatically messages being playing back to the visitor via
the door intercom system.
Attention: In order not to have the door answering machine take any external
calls, for this telephone external line signalling must be deactivated.
