Planning and installation
57
16 pin screwing
terminal
Terminals for all 8 internal subscribers.
Two screwing terminals for every
extension marked from 1 (for extension
21) through 8 (for extension 28).
4 western jacks RJ11
Western jacks for direct connection of
terminal units, e.g. telephones with
RJ11 cable connectors
Western jacks are an alternative for
extensions 21 through 24 instead of the
screwing terminals.
USB connector
Connector for your PC to configure the
telephone system
Audio jack
3.5mm phone jack to connect to an
external source for music on hold.
You can connect both, mono or stereo
equipment.
Connector for
optional door module
TSM1
The door module TSM1 will be
connected directly to that connector
and so enables you to connect a 4 wire
door intercom system, a door bell, and
a door opener.
Reset button
Press this button to reset the telephone
system, delete the configuration, or
start firmware update via the update
server.
Mounting the telephone system
It is recommended to proceed in the following order:
•
Choose the mounting location
•
Open the cabinet
•
Wall mount the telephone system
•
Install the cables for the wall outlets
•
Connect the terminal units
•
Connect the telephone system with the external lines
•
Connect the telephone system with mains power
•
Perform a functional test
