Planning and installation
54
Planning and installation
The chapter planning and installation describes the ports, helps you in choosing the
right location, the distribution of the extensions, and gives you information on what to
keep in mind during mounting and cable.
The telephone system has been designed for operation with two external lines. In
case only one external line is being used it is strongly recommended to block access
to the external line which is not being used.
Safety notes on the appropriate use of the telephone
system
Please make sure to observe the following notes with mounting, connecting and
operating the telephone system tiptel 2/8 USB:
•
This device has been tested and approved according to the
harmonised European Standard ETSI TS 203 021 and so is suitable for
connection to the public analogue telephone network.
•
This telephone system has been developed and manufactured in
compliance with the Standard "Safety of Information Technology
Equipment" (EN 60950). You may only connect equipment that also
complies with this or an equivalent Standard resp. Directive.
•
Installation has to be carried out professionally. Installation work
regarding mains voltage connection may only be performed by a
professional and authorised electrician. VDE 0100 has to be observed.
•
In case of any malfunction the AC adapter has to be removed from the
mains outlet and the external lines have to be disconnected. Install the
cables with care so that nobody can stumble across them.
•
Connect cables only to the appropriate jacks or connectors.
•
Connection cables may not be bent above a certain extent, they may
not be pulled or stressed mechanically.
•
Connection cables may only be installed inside of buildings.