Configuration and settings
49
Telephone
21 22 23 24 25 26 27 28 all
Door bell signalling on
591 592 593 594 595 596 597 598 590
Door bell signalling off
501 502 503 504 505 506 507 508 500
Set door opener authorisation
The door opener can be actuated from every telephone connected to the
telephone system in case the option door line module (TSM1) has been
installed on the printed circuit board. This authorisation can be
activated/deactivated individually for each telephone.
Programming can be carried out via telephone 21 according to the table below.
In the factory default settings door opener authorisation is activated for all
telephones.
Activate/deactivate door opener authorisation
Example: Deactivate door opener authorisation for telephone 23.
1. Telephone 21: Pick up handset
You will hear the internal calling signal.
2. Dial code number
.
Activate the programming level. You hear the
acknowledge signal.
3. Dial code number
.
You hear the acknowledge signal..
Telephone 23 has no door opener
authorisation. When dialling door opener code
number 6 the door opener will not be actuated.
4. Hang up.
Programming is done.
Telephone
21 22 23 24 25 26 27 28 all
Door opener
authorisation on
491 492 493 494 495 496 497 498 490
Door opener
authorisation off
401 402 403 404 405 406 407 408 400
