Timex Ironman Global Trainer M229 User Manual Download Page 37

Page: 37 / 42

Configure Units Settings

1. Press MODE until CONFIGURE displays.
2. Press

to highlight UNITS, then press

3. Press



to highlight the setting to change, then press

to open the setting change window.

4. Press



to highlight a selection in the setting change window, then press

to confirm your

selection.

Setting Group

Adjustment

GLOBAL

Select ENGLISH, METRIC, or NAUTICAL. This globally changes all units listed below.

Units for specific measurements can be changed individually, but changing the global

setting overrides all specific changes to individual units mentioned below.

DISTANCE UNITS

Select miles to report distance in miles, km to report in kilometers, or nm to report in

nautical miles.

SPEED UNITS

Select mph to report speeds in miles per hour, kpm to report in kilometers per hour, or

kn to report in knots.

PACE UNITS

Select min/mi to report pace in minutes per mile, min/km to report in minutes per

kilometer, or min/nm to report in minutes per nautical mile.

ALTITUDE UNITS

Select ft to report altitude in feet, or m to report in meters.

ASCENT UNITS

Select ft/min to report ascent/descent in feet per minute

or m/min to report ascent in

meters per minute.

All measurement data in Performance, Multisport, or Review modes will be expressed using the units you

selected.

Modes

Activate or deactivate Navigate Mode and associated functions, and configure power off behavior.

Configure Mode Settings

1. Press MODE until CONFIGURE displays.
2. Press

to highlight MODES, then press

3. Press



to highlight the setting to change, then press

to open the setting change window.

4. Press



to highlight a selection in the setting change window, then press

to confirm your

selection.

Setting Group

Adjustment

NAVIGATE MODE

Select ENABLE to make Navigate mode and the Track Back feature available, or select

DISABLE to turn off these features.

POWER OFF

FUNCTION

Select SHOW TIME to display the date and time when the Global Trainer

™

watch is

powered off, or select TURN OFF DISPLAY to make the display blank.

PC Sync Mode

Use PC Sync Mode to make setting changes to the Global Trainer

™

Bodylink

System watch from your

computer. All Global Trainer

™

watch settings can be changed from the device agent and downloaded to the

watch. You can also upload workout data from the Global Trainer

™

watch to your computer for long-term

tracking, and use this data with your Timex Trainer powered by TrainingPeaks account to optimize your

workout program.

Summary of Contents for Ironman Global Trainer M229











































Search results

Summary of Contents for Ironman Global Trainer M229

Reviews:

Related manuals for Ironman Global Trainer M229

Brands by name

Popular brands

Timex Ironman Global Trainer M229, User Manual

Search results

Summary of Contents for Ironman Global Trainer M229

Reviews:

Related manuals for Ironman Global Trainer M229

Brands by name

Popular brands