Timex Ironman Global Trainer M229 User Manual Download

Page: 35 / 42

Configure GPS Settings

1. Press MODE until CONFIGURE displays.
2. Press

to highlight GPS, then press

3. Press



to highlight the setting to change, then press

to open the setting change window.

4. Press



to highlight a selection in the setting change window, then press

to confirm your

selection.

Setting Group

Adjustment

GPS

Select OFF to turn the GPS system off. Select ON to turn the GPS system on.

Setting to OFF will increase battery life but workouts will not have positional or

GPS speed and distance information.

WAAS / EGNOS

Select OFF to use standard GPS positioning, which updates more quickly. Select

ON to enable WAAS/EGNOS, which is more accurate.

PACE SMOOTH

Select from VERY LOW, LOW, MEDIUM, or HIGH settings.

NOTE:

Smoothing

reduces large variations in data due to GPS fluctuation.

ALTITUDE SMOOTH

Select OFF to update altitude data more quickly. Select ON to apply an averaging

filter to get more manageable altitude data.

Version

Press

to highlight VERSION, then press

to view the firmware version.

Upgrade the Firmware

1. Insert the large USB-A plug on the download/charging clip into a USB port on the computer.
2. Attach the download/charging clip to the back of the Global Trainer

™

watch.

3. Power on the Global Trainer

™

watch, press MODE until PC SYNC appears along with the message

“WAITING FOR PC …”.

4. Open the Timex Device Agent on your computer desktop. See the PC SYNC section of the User Guide for

instructions to download the Timex Device Agent.

5. Click on the

Settings

button. You will go to the Display tab under Performance & Multisport (Mode).

6. If you are connected to the Internet, the Device Agent will check if a new firmware version is available. If a

new version is available, select the

Download

Now

button.

7. This will open the Internet browser and take you to the Firmware Download link. Click the link to

download the firmware, and save the file to your Desktop. You will be redirected to the TrainingPeaks web

site for download, and be sure to allow access to the web site if it is blocked.

NOTE:

When you download new firmware to your Global Trainer

™

watch, your configuration settings, as

displayed in the Device Agent Settings tab, are erased from the watch unless you save them.
8. To save your configuration settings, select the

Configure

tab (at the top of the Timex Device Agent

Settings screen), and select

GPS

on the left hand side.

Summary of Contents for Ironman Global Trainer M229











































Search results

Summary of Contents for Ironman Global Trainer M229

Reviews:

Related manuals for Ironman Global Trainer M229

Brands by name

Popular brands

Timex Ironman Global Trainer M229, User Manual

Search results

Summary of Contents for Ironman Global Trainer M229

Reviews:

Related manuals for Ironman Global Trainer M229

Brands by name

Popular brands