Error Diagnosis with system settings
Open the
system settings
1
.
In the first place, check if the time clock has derived the correct IP address. Tap
on the menu item
communication
2
and then on
LAN Parameters
3
. If DHCP
is activated, the IP address within the menu item
IP
must be right. Check then,
if the LAN cable is connected correctly. The LAN port at the time clock should
exhibit a steady light flash.
If the IP address was derived correctly, you must check if all other settings on
your time clock are defined according to your company network.
By default, the DNS is defined as 8.8.8.8. If this is not accessible within your com
-
pany network, we have to install a new configuration via remote session.
If you have ordered a
time clock with Wi-Fi configuration
, please check the
configuration data on your time clock. In the case of the data not being correct,
connect the time clock to an existing LAN connection. This way, we can establish
a Wi-Fi configuration on your time clock.
1
2
3
46
47
