Enroll fingerprints
In order to register fingerprints, the
configuration of transponders
must have
already taken place. Select
BioKey Config
1
on the display, enter your pin and
tap then on
Learn finger
2
. Now bring the transponder of the user, whose fin
-
gerprint you wish to register, to the reader unit.
Within the menu
Enroll
you can select your preferred finger by touching it. Then
tap on
Enroll selected finger
3
. Follow the instructions on the display and pla-
ce your chosen finger on the reader unit until you hear a signal tone. Repeat this
process two more times. Then, you will see the notification '
Successfully enrol-
led, Quality: X. Please press key
'
4
. Tap on the green field.
What to consider when enrolling a fingerprint:
• Hold your finger vertically and make sure you apply a little pressure.
• Don't move your finger while enrolling.
• Damp fingers or a damp sensor can worsen the result.
• Cold or dry fingers can be the reason for problems.
• Some fingers might not be suitable. Try another finger to achieve better results.
You can register more fingerprints or leave the menu by tapping on the
arrow
5
in the top right corner. Then, tap on
Enter: Leave this menu
in order to return
to the main menu.
Consider that your fingerprint should reach a quality
score of 80% at the minimum.
i
1
2
3
4
5
28
29
