timecode systems SyncBac PRO, User Manual

Page: 50 / 64

FAQs
In this section, you can find some of the most frequently asked questions about
SyncBac PRO, and our answers to these problems. If you have a question, you may
find that the answer is right here. If your question is not covered, please contact
Timecode Systems for assistance.
Can you Genlock the GoPros?
The SyncBac PRO is a timecode solution for GoPro HERO4™, and it embeds the
timecode as metadata into the mp4 file. Unfortunately, we are unable to offer
genlock/sensor sync as HERO4™ cameras do not have the architecture to support an
external genlock.
Is the SyncBac PRO the Right Solution for my VR Rig?
It depends on your requirements. SyncBac PRO is a timecode-only solution and does
not provide genlock or sensor synchronisation.
Using SyncBac PRO for timecode synchronisation does have advantages over using
visual/audible markers. With SyncBac PRO, you simply attach a SyncBac PRO to each
GoPro HERO4™ in the rig and then begin filming. You then create a multi clip using
timecode for the synchronisation in your NLE and trim off the front of the recording,
before putting it through your stitching software.
If you use SyncBac PROs with a :pulse master, you also have the option of remote
control for start/stop recording and switching the HERO4™s on/off. Remote control
can be very useful when your cameras are set up in a rig.
The remote control features are provided by our free BLINK Hub app.
50 SyncBac PRO User Guide