Look at the main screen to find out which channel a SyncBac PRO is set to use. The
channel is shown in the bottom-right corner, next to the battery indicator.
In the image above, Ch.CE09 indicates that the SyncBac PRO is set to use RF
Channel 09.
Example 1: Join a BLINK network
Let's say you have three SyncBac PRO units and a :pulse unit. The :pulse unit is
set to be the 'master' and uses
RF Channel 4
.
To get the SyncBac PRO units to synchronise with the :pulse unit, you need to
set all three of the SyncBac PROs to use
RF Channel 4
. They also need to be
set to the correct
country/area
and to run in
RF Slave
mode.
With these settings in place, the master :pulse unit will connect to the slave
SyncBac PROs and set their clocks (as long as the slave SyncBac PROs are
within range of the master).
SyncBac PRO User Guide
29
Summary of Contents for SyncBac PRO
Page 6: ...vi SyncBac PRO User Guide...
Page 58: ...58 SyncBac PRO User Guide...
Page 63: ...SyncBac PRO User Guide 63...
