TW 280TDHB/(a)
25 / 65
DECALS
C190-0142
01.03.2019
Rev: 2.0
Warning.
Hot exhaust.
Danger.
Rotating blades.
Keep hands and feet out.
Warning.
High velocity discharge -
keep clear.
Reverse feed
Personal Protective
Equipment required.
See Page 6.
Forward feed
Read the instruction manual
for greasing and
maintenance information.
Warning
Do not engage starter motor for
more than 20 seconds. Allow one
minute before attempting to
start. Investigate reasons for
failure to start. Excessive
cranking will result in starter
motor failure. This will not be
covered under warranty.
The instruction manual with
this machine contains
important operating,
maintenance and health and
safety information. Failure
to follow the information
contained in the instruction
manual may lead to death or
serious injury.
Push safety bar to stop.
Clean under blades before
refitting or turning.
Failure to do so may result in
blade(s) coming loose and
damage being caused to the
rotor housing.
Do not pull here.
New drive belts need
re-tensioning.
When new belts are fitted check
tension every 2-3 hours & adjust
until tension remains constant.
Push to stop,
Pull to reset.
(engine)
Fuel Here.
Risk of fire. Allow engine to cool
for 1 minute before refuelling.
Use diesel fuel only.
Danger
Rotating blades.
Keep hands and feet out.
Danger
Do not climb into the feed funnel.
Decal Description
Decal Description
616
617
670
1661
1662
4099
2800
2949
3022
1399
P691
19517
18393
Lifting eye is designed to lift the
machine’s weight only.
Do not
use hoist hook on lifting eye.
Use correctly rated safety
shackle only through lifting eye.
Lifting eye to be inspected every
6 months or before each use.
Always visually inspect lifting eye
prior to each use. Do not use
lifting eye if damaged.
2801
P1301
P3611
C192-0112
C192-0102
Summary of Contents for TW 280TDHB
