W415-1466 / 04.21.15
EN
26
At the end of each burning season inspect the shield and gasket below the manifold for warping or deteriora-
tion. Replace if necessary. Both are held to the manifold with machine screws. The shield and the 1/8” (3.2mm)
fi bre cloth gasket are available from your Wolf Steel Ltd. dealer. At this time also check that the door gasket is
not worn or loose. Replace with 3/8” (9.5mm) high density fi breglass rope if necessary.
The airwash gasket and shield above the door should also be inspected and replaced if deteriorated
NOTE: Do not operate appliance if gasket, manifold shield or fi bre baffl e is deteriorated or missing.
7.10 GASKET AND SHIELD REPLACEMENT
Follow these instructions:
A.
Remove the rear bricks, then remove the baffl e.
B.
Remove the 2 nuts and bolts securing the secondary
air manifold in place.
C.
Remove the secondary air manifold and gasket.
Replace.
AIRWASH
SHEILD
AND
GASKET
SLOT
SECONDARY AIR MANIFOLD
NUT AND
BOLT(x2)
SIDE VIEW
