W415-1466 / 04.21.15
EN
15
!
WARNING
5.4 BRICKS AND BAFFLES INSTALLATION
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
E
C
B
A
D
D
E
With the appliance and chimney installation completed, move the bricks into place as illustrated below.
A.
Install the bottom nine (A) bricks and one (B) brick, working from the back of the appliance forward as
illustrated.
B.
Install four (A) bricks along both sides of the appliance.
C.
Install the four (A) bricks and one (C) brick along the back wall by pivoting the bricks up under the brick
retainer.
NOTE: Place narrow (C) brick in centre.
D.
Install two (D) bricks along the front of the appliance below the ledge at the bottom of the door
opening.
E.
Carefully pivot two (E) fi bre baffl es up onto the secondary air tubes as illustrated. Ensure that the top
baffl es are pushed all the way to the rear of the fi rebox, leaving a minimum of a 1 inch gap along the
front. This will allow the fl ue gases to escape the fi rebox. Ensure overlap joint is tight.
BAFFLE
SECONDARY
AIR TUBES
OVERLAP
JOINT
OPERATION OF THE APPLIANCE WITHOUT THE BAFFLES CAN RESULT IN EXCESSIVE TEMPERA-
TURES THAT COULD DAMAGE THE APPLIANCE, CHIMNEY AND THE SURROUNDING ENCLO-
SURE.
