Timberland VD31 Instruction Manual Download Page 5

Page: 5 / 136

TIME SETTING

1. Pull out the crown when the second hand is at the 12 o’clock

position.

[ Crown position ]

VD31...second click.

VD32...first click.

2. Turn the crown to set the hour and minute hands. (Check

that 24 hour hand is set correctly)

3. Push the crown back normal position in accordance with a

time signal.

Note

* The 24 hour hand moves correspondingly with the hour hand.

* The moment of the date changes is midnight. When setting the hour hand, make sure that AM/PM is

correctly set by using the 24 hour hand as an AM/PM indicator.

• Using the time difference correction

When moving to a country or area which is in a different timezone, the current time in the local time can

be corrected.

1. Crown at the normal potion.

2. To adjust the time by pressing the button A or B.

* By pressing button A the hands move counter clockwise. -1 hour / push

* By pressing button B the hands move clockwise. +1 hour / push

Summary of Contents for VD31









































































































































Search results

Summary of Contents for VD31

Reviews:

Related manuals for VD31

Brands by name

Popular brands

Timberland VD31, Instruction Manual

Search results

Summary of Contents for VD31

Reviews:

Related manuals for VD31

Brands by name

Popular brands