Timberland VD31 Instruction Manual Download Page 120

Page: 120 / 136

Normal position,

watch runs

Day setting:

Turn the crown clockwise and

advance the hour and minute hands

till the day hand advances to the next

day. The day hand cannot be set

independently. Then turn back the

hour hand by about 4 hours, and

advance it again till the day hand

advances to the next day. Repeat the

same procedure and set the day hand

to the desired day of the week.

Time setting:

Set to the correct time. Be sure to

check that AM/PM is properly set.

Push crown back to position 1.

DAY HAND

24-HOUR SUB-DIAL SETTING:

The 24-hour hand moves correspondingly with the hour

and minute hands. When setting the time be sure to

check that the 24-hour hand is set properly.

DATE HAND

-Quick change of the date
(



clockwise )

Summary of Contents for VD31









































































































































Search results

Summary of Contents for VD31

Reviews:

Related manuals for VD31

Brands by name

Popular brands

Timberland VD31, Instruction Manual

Search results

Summary of Contents for VD31

Reviews:

Related manuals for VD31

Brands by name

Popular brands