Timberland VD31 Instruction Manual Download Page 85

Page: 85 / 136

a. TIMEKEEPING
12/24H Format

• In the timekeeping mode, press “A”

to switch between 12/24H formats.

Calendar

• In the timekeeping mode, press and

hold “D” to display: Year, Month, Date.

Time Setting

1. In the timekeeping mode, press and

hold “A” until the seconds to flash

(flashing indicated in set mode).

2. Press “D” to reset the seconds.

3. Press “B” change to the next

selection.

4. Press “D” to increase the number,

press and hold to increase at high

speed.

5. Repeat step 3 and 4, the selection in the following

sequence:

Seconds Hour Minutes Year Month

Date.

6. Press “A” to exit the set state, after you set (The

day of week is automatically displayed in accordance

with year, month and date setting).

Summary of Contents for VD31









































































































































Search results

Summary of Contents for VD31

Reviews:

Related manuals for VD31

Brands by name

Popular brands

Timberland VD31, Instruction Manual

Search results

Summary of Contents for VD31

Reviews:

Related manuals for VD31

Brands by name

Popular brands