Timberland VD31 Instruction Manual Download Page 51

Page: 51 / 136

1. EL - Press button D will activate EL illumination for 3 seconds in any mode.

2. Time Setting - Press E to enter the time mode. Press C for 2 seconds will enter the time setting

mode, second will flash, press E to reset second to zero. Press C will flash the hour, press E to set

the correct hour. Press C will flash the minute, press E to set the minute. Press C to flash the 12/24

selection, press E to select.

* When setting the second, less than 30 seconds will reset to zero, more than 30 seconds will advance 1

minute.

* When setting the time, press and hold E will activate the fast advance of numbers.

* If no button is pressed for 60 seconds, the time setting mode will return to normal time mode.

3. Calendar Setting - Press E to enter the calendar mode. Press C for 2 seconds will enter the

calendar setting mode, month will flash, press E to select the month. Press C will flash the date, press

E to select the date. Press C to flash the day, press E to select the day.

* When setting the date, press and hold E will activate the fast advance of numbers.

* If no button is pressed for 60 seconds, the calendar setting mode will return to normal calendar mode.

4. Alarm Setting - Press E to enter the alarm mode. Press C for 2 seconds will enter the alarm

setting mode, hour will flash, press E to select the hour. Press C will flash the minute, press E to

select the minute. Press C to flash the alarm/chime selection, press E to select the on or off.

Summary of Contents for VD31









































































































































Search results

Summary of Contents for VD31

Reviews:

Related manuals for VD31

Brands by name

Popular brands

Timberland VD31, Instruction Manual

Search results

Summary of Contents for VD31

Reviews:

Related manuals for VD31

Brands by name

Popular brands