www.timberk.com • electric metal ceramic fan heater
3
10. Do not place the unit nearby curtains, shutters, etc. (safe distance to
objects, located nearby, must amount not less than 50 cm), otherwise it
may block air intake and result in overheating of the unit.
11. It is not recommended to use extension cords. If it is still necessary, try
to use the shortest possible extension cord with the wire strand section of
the extension cord not less than the wire strand section of the cord of the
fan heater. DO NOT USE AN EXTENSION CORD FOR MORE THAN ONE
ELECTRIC APPLIANCE AT A TIME.
12. Do not operate the unit nearby explosives or flammables.
13. Do not leave the operating unit for a long time without any supervision.
14. Place the unit only vertically on even and dry surfaces.
15. Bad contact between the power cord plug of the heater and an electric
outlet may result in overheating of the plug.
IF NECESSARY, MAKE SURE TO REPLACE OLD OUTLETS.
16. Use ~220V, 50Hz electric mains to connect the heater.
17. MAKE SURE THAT ELECTRIC APPLIANCES ARE NOT CONNECTED
TO THE SAME ELECTRIC CIRCUIT (FOR EXAMPLE, AN EXTENSION
CORD) USED FOR THE HEATER. CIRCUIT OVERLOAD MAY RESULT IN
FAILURES OF LIGHTING, MELTING OF WIRING AND FIRE.
18. The heater’s power cord must not be pressed down by furniture or be
laid in places where it can be easily stepped on.
19. Do not use the fan heater in rooms with increased humidity, nearby
bath-rooms, shower bath, pools, ponds, i.e. in places where it may be
tipped over into water, or water or water drops may contact it.
20. Do not place the heater on uneven or unstable surfaces. It is also
forbidden to mount the unit above an electric outlet, provided that the hot
air flow will contact it.
21. The heater is not designed for industrial application. It is used only as
an additional means of heating.
Make sure to take this information into consideration.
4. PERFORMANCE CAPABILITIES
Key features
1. Thanks to its small size and weight, the fan heater is convenient to be placed
in any room where additional air heating is required.
2. Durable and flameproof metal-ceramic heating element provides quick and
effective air heating, doesn’t pollute the environment and doesn’t burn oxygen.
3. A low noise electric motor.
4. A fuse and thermal limiter protect the fan heater from overheating.
5. Antistatic high-quality ABS plastic guarantees long service life.
Technical characteristics
Technical characteristics are shown in Table 1.
Table 1
TFH W200.XS
TFH W200.XB
TFH W180.XE
Nominal power consumption
W
2000
2000
1800
Rated current
А
9,1
9,1
8,2
Voltage
V/Hz
~220/50
~220/50
~220/50
Water protection class
IPx0
IPx0
IPx0
Electric protection class
Class II
Class II
Class II
Noise level
dB
55
55
55
Heating area
m
2
23-25
23-25
18-22
Weight
kg
2,3
2,3
3,25
Dimensions
mm
220x520x122
220x520x122
210x610x125
TFH W200.TQ
TFH W250.RX
TFH W250.ZM
Nominal power consumption
W
2000
2500
2500
Rated current
А
9,1
11,4
11,4
Voltage
V/Hz
~220/50
~220/50
~220/50
Water protection class
IPx0
IPx0
IPx0
Electric protection class
Class II
Class II
Class II
Noise level
dB
55
55
55
Heating area
m
2
23-25
27-30
27-30
Weight
kg
2,1
4,2
4,2
Dimensions
mm
185x560x117
235x700x150
235x700x150
For a detailed description of technical parameters and characteristics go to
www.timberk.com or contact TIMBERK official dealers.
