www.timberk.com • electric metal ceramic fan heater
6
Operation by remote controller (for W200.XS / W200.XB / W200.TQ
/ W180.XE models).
1. Connect the unit’s power cord to a grounded European-standard outlet.
Do not use the unit on uneven and unstable surfaces, nearby combustible,
flammable or easily deformable objects.
2. To switch on the unit, press button « », after that an indicator light
will illuminate on the control panel indicating the activate fan mode. Press
button « » again to switch off the heater.
3. Select a comfortable heating mode by setting the desired heat flow. To
do so, press «MODE» button to select LOW heat flow mode (1000W). Or
press «MODE» button to select HIGH heat flow mode (2000W). Indicator
lights on the control panel of the unit will display the modes you select.
4. This heater is equipped with a built-in 7.5 hour timer function, activated
consecutively. To activate this function, press TIMER button on the remote
controller. The timer sets time for operation of the unit. By sequential
pressing of TIMER button, you select the time of its operation, upon that
indicator lights illuminate respectively:
0.5h-1h-1.5h-2h-2.5h-3h-3.5h-4h-4.5h-5h-5.5h-6h-6.5h-7h-7.5h
Operation by control panel (for W200.XS / W200.XB / W200.TQ /
W180.XE models).
1. Connect the unit’s power cord to a grounded European-standard outlet.
Do not use the unit on uneven and unstable surfaces, nearby combustible,
flammable or easily deformable objects.
2. To switch on the unit, press button « », after that an indicator light will
illuminate on the control panel indicating the activate fan mode.
3. Select a comfortable heating mode by setting the desired heat flow. To
do so, press button «MODE» as many times as necessary to activate the
selected heat flow mode. Indicator lights on the control panel of the unit
will display the modes you select, including the automatic air louver control
mode SWING LED illuminates*. Pressing button «MODE» several times,
depending on the current mode, will switch off the unit, and a green LED
will be flashing upon that.
4. To activate the built-in timer function, use TIMER button. The timer sets
time for operation of the unit. By sequential pressing of TIMER button,
you select the time of its operation, upon that indicator lights illuminate
respectively:
0.5h-1h-1.5h-2h-2.5h-3h-3.5h-4h-4.5h-5h-5.5h-6h-6.5h-7h-7.5h
IMPORTANT!
The manufacturer can alter the appearance of the
remote controller without prior notification of the user to
introduce modifications and improve its external design.
After switching off, the unit will operate in the fan only
mode to cool down heating elements for about 30
seconds. Then the fan heater will be switched off.
Remote controller for W200.XB/ W200.XS model
2
6
7
3
2
6
7
3
1. «TIMER» button. The button is used to activate the timer to switch on
the unit
2. «ON/OFF» button. The button is used to switch on/off the unit
3. « » button. The button is used to select the Low power (1000 Watts)
4. « » button. The button is used to select the High power (2000 Watts)
Fig. 4
3. «ON/OFF» button. The button is used to switch on/off the unit
4. «DOWN» button. The button is used to select the Low power (1000 Watts)
5. «UP» button. The button is used to select the High power (2000 Watts)
