Timberk T-HU3.4-A11M-SV, Instruction Manual

Page: 16 / 40

IM2021
16
To fill the tank – see Fig. 2.
Fig. 2
IMPORTANT!
For the operation of the device, it is better to use purified water from household water
filter. It is necessary for the life time of the humidifier. With purified water there will be
no white spots around the device.
White spots around the device are a salt of calcium and magnesium, which are part of
ordinary tap water. When using unpurified water, they are discharged with steam and
deposited on surrounding objects and surfaces. Although these substances are safe
for people, in large quantities they can have harmful effects on furniture. As an option
for this model, you can purchase a filter for softening water.
•
Do not fill the tank with other liquids but filtered tap water. Different composition of
liquids has harmful effect on internal parts of the device and causes malfunctions.
•
Do not fill the unit or the water tank with such additives as essential oils,
fragrances, cleaning agents, chemical medical drugs, warm water (above 40°), etc.
Otherwise, the water tank and internal parts of the unit will be damaged and
inoperable. Do not fill water directly into the internal parts of the unit or the
atomizer.
• Water inside the unit may cause malfunctions of the unit.
•
Do not hit or throw the water tank. It may get damaged resulting in water leaks. Do
not use the unit in case if the water tank is heavily hit. Immediately contact the
technical support service or the maintenance and repair station.
• Every day fill the tank with fresh filtered water and keep the unit clean.
8. OPERATION OF THE DEVICE
Control panel
1. Indicator light
It lights up green when the appliance is operating. It lights up red when there is no water in the
tank.
2. Lighting on/off button
It is used to turn on/off color lighting.
3. On/off and steam output intensity regulator
It is used to turn the appliance on/off and adjust the steam output intensity.