Timberk T-HU3.4-A11M-SV, Instruction Manual

Page: 13 / 40

IM2021
13
•
Do not attempt to repair the device or change its
parts by yourself. To repair the product, contact an
authorized service center.
• If the power cord or plug is damaged, to avoid
danger, it must be replaced by the manufacturer,
authorized service center, or similar qualified
personnel.
•
To avoid burns, do not touch the humidifier
membrane, while it is operating. Due to the high
oscillation frequency, the membrane becomes very
hot.
•
To avoid risk of electric shock, do not place the
power cord near heating appliances or flammable
or combustible substances.
•
Remove the electrical plug from the power outlet in
the following cases: before draining or filling the
tank with water; before assembly, disassembly and
cleaning, or if you do not use it; before
mounting/dismounting the humidifier elements;
before moving the humidifier to another location.
Install the humidifier on a flat, dry surface.
•
When disconnecting the appliance from the mains,
do not pull on the power cord, grasp the plug. Do
not twist and do not wind it on anything.
•
Humidifier’s steam can damage the surfaces it
touches. Do not install the humidifier on the floor,
or in the vicinity of heating appliances, walls,
furniture, or other items.
•
The manufacturer and seller are not responsible for
damage caused by improper positioning of the
humidifier. The humidifier should be installed on
any elevation, for example, on a table, stand, etc.
at least 60 cm from the floor and at least 10 cm
from the wall.
•
Do not put the humidifier in water or other liquids.