1
Safety Instructions and Warnings
Do not connect the Mirage to a
trailing plug and socket outlet.
This may present a shock hazard.
Do not attempt to service the unit.
Contact an authorised dealer or
repair service.
Servicing the unit yourself may
cause an electric shock or fire.
Keep the power adaptor away from
any heat source.
This may cause a fire.
If there are any unusual sounds or
smells coming from the unit, turn it
off immediately and contact an
authorised dealer or repair service.
This may cause an electric shock
or fire.
Do not use a damaged socket and
do not let the power cord touch a
heat source.
This may cause an electric shock
or fire.
Make sure the wall frame is
securely fixed to the wall.
The mirror frame weighs 14.5 Kg
(32 lb) and when the unit is open
during installation all of the weight
is on the hinged side.
Ensure the antenna is located
away from overhead cables.
This may cause an electric shock.
If an outside antenna is
connected to the unit, ensure the
external to internal cable entry is
fully sealed
This may cause an electric shock
or fire.
Waste Electrical and Electronic Equipment (WEEE) Directive
In the European Union, this symbol indicates that this product should
not be disposed of with household waste. It should be deposited at an
appropriate facility to enable recovery and recycling.
This equipment must be installed by a
competent person, in accordance with current
IEE wiring regulations. If in doubt consult a
qualified electrician.
Always switch off the electrical supply at the
mains during installation.
Fitting in Bathrooms is subject to the
appropriate location (see IEE Zones opposite).
Refer to IEE Regulations.
This product is suitable for Zones 2 and Outside
Zones.
It is not suitable for installation in
Zone 0 or Zone 1
.
It is not suitable for installation in Saunas,
Steam Rooms or Shower Cubicles.
Fire and Safety regulations must be obeyed.
The 12 VDC power adaptor is not waterproof
and so must be positioned in a dry, well
ventilated area away from any water and
moisture.
This product has an Ingress Protection Rating
of IP44 and is only suitable for indoor use.
Make sure the wall frame is securely attached
to the wall in accordance with the installation
instructions. The mirror frame weighs 14.5 Kg
(32 lb) and when the unit is open during
installation all of the weight is on the
hinged side.
It is recommended that the unit is cleaned with
a soft dry cloth when turned off. Do not use
abrasive materials.
Failure to observe the above safety warnings
may invalidate the warranty.
This equipment has an IP44 rating and is suitable for use in Zone 2 and Outside Zones.
Zone 1
Zone 2
600mm
2250mm
Zone 1
Zone 2
Zone 2
Radius
600mm
600mm
Zone 2
Zone 0
Zone 0
Zone 0
IEE Bathroom Zones
HIGH-DEFINITION MULTIMEDIA INTERFACE
TM
SPLASHPROOF
IP44
CAUTION:
RISK OF ELECTRIC SHOCK DO NOT OPEN
WARNING
: TO PREVENT INJURY, THIS APPARATUS MUST BE SECURELY ATTACHED TO THE WALL IN
ACCORDANCE WITH THE INSTALLATION INSTRUCTIONS.
CAUTION
: DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL. BEWARE OF STATIC SENSITIVE PARTS.
This product contains Electrical/Electronic Parts which are produced
using components in compliance with the requirements of: European
Union Directive
2002/195/EC
for the Restriction of the use of certain
Hazardous Substances in Electrical and Electronics Equipment (RoHS).
RoHS
COMPLIANT
