18
EN
TIMER FEATURE
In the TIMER feature you can set the timer points for operation of heat pump at various temperatures. The feature enables four time
points daily for different settings of the water temperature or heat pump shut
-
down. The next timer point cannot be set one hour after
the previous setting. The time setting step is 10 min. If the symbol in field no.
16
is not visible, the TIMER feature is not available.
When setting the timer you must know the habits and take into account the duration of heating times. Senseless settings to which the
system cannot respond will not achieve the set temperature points and will have a negative impact on the heat pump
’
s efficiency.
SELECTING THE TIMER MODE OF OPERATION
TIMER MODE FOR THE ENTIRE WEEK
4
17
•
While the feature is on, field no.
4
is illuminated.
•
Field no.
17
shows the number of days remaining until the end of the VACATION mode. If the
display is in the saving mode, touch the display to see the number of remaining days.
•
After the set number of days has elapsed, the heat pump resumes the previously set mode of
operation, and illumination of field no.
4
stops.
•
The "VACATION" feature can be switched off manually by pressing field no.
4
briefly (main
display).
In case the heater is disabled (parameter 01:09) minimum temperature is maintained only
by the heat pump operation. In case the source temperature is outside the range of
operation of the heat pump, freeze protection will not work!
16
1.
Hold (for 3 s) field no.
16
.
7
7
7
2.
Field no.
7
starts to flash.
3.
By pressing
+
or
–
select from among three timer options:
-
timer mode for the entire week (in field no.
7
the numbers from 1 to 7 flash),
-
timer mode of operation for the period between Monday and Friday and from Saturday to
Sunday (in field no.
7
the numbers 1 to 5 flash ),
-
timer mode of operation for each individual day (in field no.
7
number 1 flashes).
4.
Confirm the setting by pressing the symbol.
17
5.
Field
17
starts to flash.
6.
By pressing
+
or
–
set the time of the first time point t1.
7.
Confirm the setting by pressing the symbol.
Summary of Contents for TC100ZW
Page 1: ...INSTRUCTIONS FOR USE EN TC 100 120 ZW R TCM 200 ZE6GW ...
Page 2: ...2 ...
Page 36: ...05 2020 826264 ...
