tiki TC100ZW, Instructions For Use Manual

Page: 20 / 36

20
EN
"RADIATOR HEATING" FEATURE (APPLIES TO TC...ZWR MODELS)
The feature controls the heating of a radiator connected to the heat pump. You can choose between manual activation, automatic
operation, timer operation or external control of the “ radiator heating ” feature. If the symbol in field 11 is not visible, the “ RADIATOR
HEATING ” feature is not available.
a) MANUAL ACTIVATION OF THE “ RADIATOR HEATING ” FEATURE
In this feature you can set the time of radiator heating.
The set features of heating domestic water always have priority before the “ radiator heating ” feature. If domestic water is
being heated at the moment of activation of the feature, radiator heating will start once the domestic water heating switches
off.
b) AUTOMATIC FUNCTIONING OF THE “ RADIATOR HEATING ” FEATURE
The feature automatically activates radiator heating after a major consumption of hot water from the water tank (e.g. after someone
has taken a shower) for 3 hours (factory default, parameter 01:10).
The set features of heating domestic water always have priority before the “ radiator heating ” feature.
11
• Briefly press field no. 11 .
• Field no. 12 starts to flash.
• By pressing + or – set the time of operation of the “ radiator heating ” feature. Up to 30 minutes
you can set the time in 5 min increments and above 30 minutes you can set the time in 10
minute increments. After maximum time setting, the word ON appears on the display, indicating
constant heating of the radiator until manual switch off.
• Confirm the setting by pressing the symbol.
11
• During the operation of the feature, field 11 flashes.
• The feature can be deactivated by shortly pressing field 11 (main display).
11
• Hold (for 3 s) field 11 .
• Field 12 starts to flash.
• By pressing field + or – set to "Auto".
• Confirm the setting by pressing the symbol.
11
• During the functioning of the feature field 11 is illuminated.