ENGLISH – Tiki start
39
7. Standards
The Tiki start adheres to the following standards.
7.1 Reports
7.1.1 Notified body
Tiki Safety AB appointed the independent notified body British Standard Institute (BSI)
for the examination on the Tiki start and the production line of the Tiki start in regard
to the regulation standards under: 7.3 Regulation standards on page 40.
BSI group (2797): Say Building, John M. Keynesplein 9, 1066 EP Amsterdam,
Netherlands.
The independent notified body carried out verifications and tests to verify:
■
The conformity of the Tiki start
■
The production line of the Tiki start
both in regard to the applicable essential health and safety requirements and the
relevant protection class.
The reports, calculations, inspections and examinations on these tests that are
carried out, are available as to the specifications of EU 2016/425 on request to Tiki
Safety AB, refer to: www.tikisafety.com.
7.1.2 External body
The Research Institutes of SwEden (RISE) performed tests on the Tiki start towards the
ability and efficiency to clean the Tiki start and effectively remove the biohazardous
particles of hazardous mixtures.
The results of these tests were positive.
7.1.3 Performance test
To ensure the conformity of the Tiki start in the production, Tiki Safety AB performs a
test on every mask.
Tiki Safety AB performs these tests on every mask to ensure the conformity of the
Tiki start produced with the design specifications.
For the description of the performance test, refer to sub-paragraph:
2.4.3 Performance tests on page 19.
7.2 Protection class
The Tiki start holds the protection class:
EN 12942 TM3P R SL, CE 2016 / 425.
