tiki 1005-51 English Manual Download Page 28 | Manualshive

Page: 28 / 48

background image

28

Tiki start – ENGLISH

4.1 Charge the batter(y)(ies)

1. Do not charge batteries in an environment with temperatures below 0 °C!
2. Note that the Tiki start can be used with or without the external battery.

Even if the external battery is used, charge the internal battery completely. Note
that the external battery is optional and is to be ordered separately.

3.  Connect the battery charger (1e on figure 1, page 14) to the batteries.
4.  If the indicator light on the battery charger is red, the battery is charging.
5.  If the indicator light on the battery charger is green, the battery is fully charged,

refer to figure 2.

6. If only the internal battery is used, the Tiki start is ready for use as the internal

battery is charged.

Note – If the battery charger does not have a charge indicator light, please read the
instructions accompanying this charger.

«
...
26
27
28
29
30
...
»

Summary of Contents for 1005-51

















































Reviews:

No comments

Related manuals for 1005-51

Brand: Nebu-tec Pages: 2

Brand: O-Two Pages: 15

Brand: Krömker Pages: 373

Brand: Kimberly-Clark Pages: 5

Brand: ILC Dover Pages: 40

Brand: Kasco Pages: 11

Brand: Philips Pages: 21

Pico Traditional

Brand: Philips Pages: 40

Porta-neb with SideStream

Brand: Philips Pages: 132

Brand: Philips Pages: 164

Brand: B.Well Pages: 11

Brand: VITO Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands