manualshive.com logo in svg

tiki 1005-51, English Manual

Share
Download
tiki 1005-51 English Manual Download Page 2

2 

Tiki start – ENGLISH

General enquiries: 

[email protected] 

Sales related questions: 

[email protected]

 

Convinced: 

[email protected]

Phone: 

+46 8 35 32 49

The time to charge and the 

operation time may vary depending 
on: temperature, filter type, amount of 
particles in the air, breathing intensity of 
the user etc.

All rights to Tiki start and this user 
manual are reserved to Tiki Safety AB.

No parts of this manual may be 
reproduced in any form without the 
explicitly written permission from  
Tiki Safety AB.

All illustrations and text in this user 
manual are subject to copyright ©2020.

The Tiki start that is described in this 
user manual is patented worldwide 
under patent number: D755953.

The user manual in English (EN) is the 
original manual, the user manuals in 
other languages are translations. 
 
This manual may change at any 
time. The latest version is available 
for download at www.tikisafety.com. 
Ensure you keep the latest version of 
the manual on hand for reference.

Tiki Safety AB performes every effort 
to produce the Tiki start to superior 
industrial standards, legal requirements, 
safety – and comfort for the user.

If you as a user are pleased with the 

Tiki start, tell your network!

If you are despite our effort, either 

not fully pleased or presume our Tiki 
start holds points of improvement, 
please tell us! 

And give us the opportunity to 

address that challenge and further 
improve our production standard, we 
are grateful for your feedback!

Tiki Safety AB makes no 

representations or warranties with 
respect to the contents hereof. 

In addition, information contained 

herein are subject to change without 
notice. 

Every precaution has been taken in 

the preparation of this manual. 

Nevertheless, Tiki Safety AB assumes 

no responsibility for errors or omissions 
or any damage that results from the 
use of the information contained in this 
publication. 

Measurements and handling of 

the Tiki start that are described in this 
manual assumes optimal conditions. 

Tiki Safety AB
Skällstavägen 9
SE-197 40 Bro
Sweden

www.tikisafety.com

 

start

Summary of Contents for 1005-51

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands