manualshive.com logo in svg

TigerStop TigerCrossCut, Installation Manual

Share
Download
TigerStop TigerCrossCut Installation Manual Download Page 23

23

5.  The PreSet value is now set. 

6.  Press 

STOP

 to go back to the Ready Screen.

Using the PreSet

1.  Start at the Ready Screen.

2.  Press the [PrSet] soft key to access the PreSet menu.

3.  Enter the PreSet number you wish to use and press 

START

.

4.  TigerCrossCut will move to the PreSet position.

Deleting PreSets

1.  Start at the Ready Screen.

2.  Press the [PrSet] soft key to access the PreSet menu.

3.  Enter the PreSet number you wish to delete and press the [Clear] 

soft key.

4.  Press 

 to clear.

5.  TigerCrossCut has now deleted the PreSet.

Quick Calibration

Quick calibration is a shortcut to the calibration setting. This allows advanced TigerCrossCut users to 

quickly calibrate.

1.  Start at the Ready Screen. 

Note: If you are viewing the expanded options, press 

.

2.  Press the [Calib] soft key.

3.  Measure how far the TigerCrossCut is from your saw blade.

4.  Enter this measurement and press the [Done] soft key.

5.  TigerCrossCut is now calibrated.

Summary of Contents for TigerCrossCut

































Reviews:

No comments

Brands by name

Popular brands

Load more brands