manualshive.com logo in svg

TigerStop TigerCrossCut, Installation Manual

Share
Download
TigerStop TigerCrossCut Installation Manual Download Page 19

19

Set CrossCut Alarm

The CrossCut Alarm setting alerts the user when a flip stop change is required.

1.  From the Ready Screen, press the [Show] soft key to show the menu 

options.

2.  Press the [Menu] soft key to display the Menu Select screen.

3.  TigerCrossCut requires a password to access all menu options. 

Enter your TigerCrossCut password and press  .

Note: By default, the TigerCrossCut password is set to the serial number.

4.  At the Menu Select screen, press the [Options] soft key to access the 

Options menu.

5.  Press 

 to scroll through the settings. Stop when you get to the 

CrossCut Alarm setting.

6.  Press [B] or [C].

7.  Enter your TigerCrossCut password and press  .

Note: By default, the TigerCrossCut password is set to the serial number.

8.  Press [B] or [C] to toggle the setting.
9.  Press   to save the parameter.

1.  Press 

 to scroll through the settings. Stop when you get to Units.

2.  Press [B] to toggle between inches and metric.

3.  Press the [Done] soft key when finished.

Set Units

TigerCrossCut can display its position in inches or metric.

TigerCrossCut is now ready to use. To view the complete TigerStop users guide, visit the

support section of www.tigerstop.com.

Summary of Contents for TigerCrossCut

































Reviews:

No comments

Brands by name

Popular brands

Load more brands