Page 14 of 20
601130040 [Revision 1502.00] [subject to changes with no previous notice]
Biofell Cascade
Operation
Display
Description
Time of day and date
Operator section
Configuration
Fault
LPB system
Turn the setting knob to access the “LPB system” menu.
Press OK.
LPB system
Device address
LPB system
Segment address
Turn the setting knob to reach segment-address parameter 6601.
Press OK to enable value modification.
Turn the setting knob to modify the set value.
Press OK to confirm the new value.
Press ESC to return to the default display.
After these operations remove and restore power on all modules.
7.2
Configuring Module 1 [master]
In Module 1 [master] one must configure a number of parameters accessed through the "Settings" menu. To do this, proceed as follows:
Operation
Display
Description
Boiler temp
Default display. If not shown, press the ESC button to return to it.
Press OK.
Time of day and date
Operator section
Hold the INFO button for 5 seconds.
Enduser
Commissioning
