6. Transportation and modification
6.1 Change test electrodes
The MultiSafe DSP HS36 can be equipped with different test electrodes. Those can be easily screwed onto
the high-tension test probes. After this, perform the self-test!
Design of electrodes
The following test electrodes are available
for the MultiSafe DSP HS36:
i = semicircular electrode (standard)
G = peaked electrode with M5-thread
Y = bifurcated electrode
6.2 Transportion
The MultiSafe DSP HS36 can be demounted for transportation.
Turn the test probe and the basic pipe counterclockwise.
After about 4 turns you can pull the test electrode from the basic pipe.
For safe transport fix the universal clip at the ball point.
Note:
The device may only be used when completely mounted and
after successfully performed self-test.
i
G
Y
16
