Tiesse Imola 0220, User Manual

Page: 15 / 376

Introduction
U
SER
G
UIDE
15

2 G.SHDSL ports that can be used in 2-Wire o 4-Wire mode

2 RS232 DCE ports with DB9F connector and/or DB25F (optional)

2 SFP optic port (optional)

4 ISDN BRI VoIP ports (optional)

4 FXS VoIP and 1 FXO port (optional)
In order to distinguish the different characteristics and communication interfaces, each model is
identified by the name
Imola XYZK , where:

X identifies the type of WAN connection on mobile network
 Y identifies the type of local network connection

Z identifies the type of WAN connection
 K identifies the type of LAN port (FE or GBE)
The values are as follows:
X
0 No mobile network connection
1 GPRS (models no longer in production)
2 GPRS / EDGE
3 GPRS / EDGE / UMTS / HSDPA
4 GPRS / EDGE / UMTS / HSDPA / HSUPA
5 GPRS / EDGE / UMTS / HSDPA / HSUPA / LTE
Y
0 1 Ethernet port present
1 2 Ethernet ports
2 5 switch Ethernet ports (4 ports in LX version)
3 1 Wi-Fi (besides Ethernet switch)
8 8 Ethernet ports
1
Z
0 No WAN connection
1 ADSL
2 ADSL2+
3 HDSL
4 SHDSL
6 VDSL2
K
0 Ethernet ports FE 10/100 Mbps
2 Ethernet ports GBE 10/100/1000 Mbps
Additional expansion cards can be mounted to provide:

asynchronous RS232 serial connectivity through two DB9 ports or a DB9 and a DB25 port,
both for connecting serial devices such as RTU, CBT, SCADA and various controllers (IKR)

direct connectivity on Fiber Optic via two SFP ports
1
- In the model with 8 Ethernet ports, the 6, 7 and 8 are always FE independently of the other 5, which may be the FE or GBE