RS232 Interface (IKR) for Imola routers
U
SER
G
UIDE
120
set ppp-serial0 directive <directive>
set ppp-serial0 no-directive <directive>
To set or to remove any option not provided by the native
CLI
commands
:
set ppp-serial0 directive unit N
this set the index number of the interface associated with the mobile session, which is like pppN.
N
value must be choose in the range between
1
and
9
. If this directive is not complied with, the name
of the interface will be ppp1 for the first port MO and ppp2 for the second port M1.
set ppp-serial0 on
activates the application with the set parameters. To deactivate the application, use.
set ppp-serial0 off
D
ISPLAY
It is possible to display the information about the serial ports using:
show interface rs232
root@IMOLA-TA-TSE> show interface rs232
serinfo:1.0 driver revision
0: uart:XMUART0 mmio:0x00000000 irq:24 tx:2934 rx:2856 RTS|DTR|DSR|CDI
1: uart:XMUART1 mmio:0x00000000 irq:24 tx:0 rx:0 DSR|CD|RI
S
ERIAL CONNECTORS
The RS232 ports of Imola are DB25 and DB9 type and the scheme of the signal is:
