TiePie Handyscope HS5 series, User Manual

Page: 27 / 47

Figure 5.2: Hardware install: step 2
Once ready, Windows will report that the driver is installed.
Figure 5.3: Hardware install: step 3
Now the driver is installed, the measurement software can be
installed and the Handyscope HS5 can be used.
5.3 Plug into a different USB port
When the Handyscope HS5 is plugged into a different USB port,
some Windows versions will treat the Handyscope HS5 as different
hardware and will ask to install the drivers again. This is controlled
by Microsoft Windows and is not caused by TiePie engineering.
5.4 Operating conditions
The Handyscope HS5 is ready for use as soon as the software is
started. However, to achieve rated accuracy, allow the instrument
to settle for 20 minutes. If the instrument has been subjected to
extreme temperatures, allow additional time for internal tempera-
tures to stabilize. Because of temperature compensated calibration,
the Handyscope HS5 will settle within specified accuracy regardless
of the surrounding temperature.
Hardware installation
23