TiePie Handyscope HS5 series, User Manual

Page: 26 / 47

HS5. Refer to paragraph 8.1 for specifications of the external power
intput.
When the Arbitrary Waveform Generator is used, the power
that the Handyscope HS5 requires may strongly increase. It is rec-
ommended to use the external power supply when the Handyscope
HS5 Arbitrary Waveform Generator is used.
5.2 Connect the instrument to the computer
After the new driver has been pre-installed (see chapter 4 ), the
Handyscope HS5 can be connected to the computer. When the
Handyscope HS5 is connected to a USB port of the computer,
Windows will report new hardware. The Found New Hardware
Wizard will appear.
Depending on the Windows version, the New Hardware Wizard
will show a number of screens in which it will ask for information
regarding the drivers of the newly found hardware. The appearance
of the dialogs will differ for each Windows version and might be
different on the computer where the Handyscope HS5 is installed.
The driver consists of two parts which are installed sepa-
rately.
Once the first part is installed, the installation of the second
part will start automatically. Installation of the second part is
identical to the first part, therefore they are not described individ-
ually here.
5.2.1 Found New Hardware Wizard
Figure 5.1: Hardware install: step 1
Windows has detected new hardware and starts installing the
drivers.
22
Chapter 5