E
21
Operating the SaneoVITAL
Switching the SaneoVITAL on and off
Use the
On/Off
button to switch the device on and off.
The software version is briefly displayed after switch-on.
To switch off, the
On/Off
button must be pressed for
about 3 seconds.
Setting the program
Set your required program as follows (see chapter Program
summary, page 9):
Please switch the massage device SaneoVITAL on
by means of the
On/Off
button. The
application
menu
of the preset program then briefly appears in
the display.
Hold the
Menu/Select
button down for about 3
seconds. Now the
program selection menu
is
displayed with the current program.
Press the
▲
or
▼
button until the required program
is displayed.
Briefly press the
Menu/Select
button. The
program
selection menu
closes. The selected program is
immediately displayed in the
application menu.
Now please select the individual stimulation
intensity using the
▲
/
▼
buttons.
Please note that the program can only be changed
when the device does not give off an impulse. In
order to change a program during program operation,
first the stimulation intensity needs to be regulated
down to “0”, using the button
▼
.
