manualshive.com logo in svg

TIA WAVEJET 400-1338-02, Component Maintenance Manual With Illustrated Parts List

Share
Download
TIA WAVEJET 400-1338-02 Component Maintenance Manual With Illustrated Parts List Download Page 31

 

WAVEJET MICROWAVE OVEN 

COMPONENT MAINTENANCE MANUAL 

WITH ILLUSTRATED PARTS LIST 

 

 

25-30-43

 

Page 303 

March 15, 2003 

 

 

B. 

Disconnect power supply wiring at connection locations. 

 

  C. 

Remove screws (139) in five places to remove power supply cover (p/o 49). 

 

 

D.  Remove screws (270), locknuts (260) and two nylon flatwashers (265) on each 

screw in three places to release the power supply assembly (245) from the rear 
panel (310). 

 

 

 

 

E. 

Remove screws (255) and flatwashers (250) in two places to release the power 
supply assembly (245) from the standoffs in the microwave cavity. 

 
F. 

Remove locknut (260) and two flatwashers (735, 740) releasing power supply from 

liner (490). 

 
 

G.  Remove screws (315) in three places from rear panel (310) below the magnetron 

cooling fan. 

 
 

H.  Gently spread the rear panel (310) away from liner and lift power supply assembly 

(245) up and out of the microwave. 

 

6.  Door Removal (IPL, Figure 1001 and 1002)

 

 
 

NOTE: 

For easiest removal, turn microwave upside down and lay it on the top. 

 
 

A. 

Open the door (95). 

 

  B. 

Remove screw (385) securing the handle (360) to the facia bar (105). 

 
 

C. 

Close door (95). 

 
 

D.  Remove screws (110, 115) (they vary in sizes) in five places securing facia bar 

(105) to weldment (390).  

 
 

E. 

Open door (95). 

 
 

F. 

Slide facia (10) forwards then lift upwards to release. 

 
 

NOTE: 

Retain all hardware. 

 
 

G.  Slide door (95) up off of the hinge plate (125). 

 
 

Summary of Contents for WAVEJET 400-1338-02






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands