manualshive.com logo in svg

Ti Lite Aero R, Owner'S Manual

Share
Download
Ti Lite Aero R Owner'S Manual Download Page 77

10-2

Aero R Owners Manual

OM_R_0809RevB

CHAPTER 10: WHEEL LOCKS

Uni-Lock

Adjusting the Uni-Lock
Tools Needed:

•  3/16” Allen Wrench

1.  Loosen the two Allen Screws in the wheel lock clamp.  See Figure 10-2.
2.  Adjust the position of the wheel lock clamp on the frame so the wheel stop embeds at least 3/16” into the tire 

when engaged in the locked position.

3.  Securely tighten the two Allen Screws that secure the wheel lock clamp to the frame.

Figure 10-2

Adjusting/Replacing Uni-Lock Wheel Lock

Allen
Screws

Handle

Wheel Stop

Frame

Tire

Replacing the Uni-Lock
Tools Needed:

•  3/16” Allen Wrench

1.  Loosen the two Allen Screws that secure the wheel lock clamp to the frame. See Figure 10-2.
2.  Slide the wheel lock out of the clamp.  
3.  Slide the new Uni-Lock into the wheel lock clamp, but do not tighten the Allen Screws.
4.  Follow the procedures under “Adjusting the Uni-Lock” on page 10-2 to position and secure the new wheel lock.

Changing the Uni-Lock from the Push to the Pull Position
Tools Needed:

•  5/32” Allen Wrench

The Uni-Lock wheel lock can be set up so that you either pull the handle to engage the lock or push the handle to 
engage the lock.  To determine which setup you have, locate the small socket head cap screw in the wheel lock 
handle base.  If it is in the upper position (see Figure 10-3), the Uni-Lock is set to the “Pull to Lock” position.  If it is in 
the lower position (see Figure 10-4), the Uni-Lock is set to the “Push to Lock” position.  

Figure 10-4

Push to Lock Position

Figure 10-3

Pull to Lock Position

Socket Head 
Cap Screw

Socket Head 
Cap Screw

Summary of Contents for Aero R
































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands