Ti Lite Aero R Owner'S Manual Download Page 58

Page: 58 / 95

6-3

Aero R Owners Manual

OM_R_0809RevB

CHAPTER 6: SIDE GUARDS

Fold-Down Rigid Side Guards (Aluminum and Carbon Fiber)

Using Fold-Down Side Guards

To fold down, simply remove the seat cushion and push the top of the side guard toward the seat sling. To unfold,
simply pull the side guard up away from the seat sling. See Figure 6-4.

Figure 6-4

Fold-Down Side Guards

Allen Screws

Clamp

Dowel

Removing the Fold-Down Side Guard
Tools Needed:

• 3/16” Allen Wrench

1. Remove the two Allen Screws that secure the two halves of the side guard clamp. See Figure 6-4.
2. Remove the fold-down side guard clamp assembly.

Reinstalling Fold-Down Rigid Side Guard
Tools Needed:

• 3/16” Allen Wrench

1. Align the two halves of the side guard clamp around the seat tube of the frame. See Figure 6-4.

Note:

On all chairs other than YG Series chairs, the half of the side guard clamp to which the side

guard mount is attached has a dowel pin protruding from the clamp that must be inserted in the side
guard clamp hole in the frame.

2. Insert the two Allen Screws through the washers and the two halves of the clamp and securely tighten.

Summary of Contents for Aero R
































































































Search results

Summary of Contents for Aero R

Reviews:

Related manuals for Aero R

Brands by name

Popular brands

Ti Lite Aero R, Owner'S Manual

Search results

Summary of Contents for Aero R

Reviews:

Related manuals for Aero R

Brands by name

Popular brands