4-6
Aero R Owners Manual
OM_R_0809RevB
CHAPTER 4: BACKRESTS, PUSH HANDLES AND STROLLER
HANDLES
6. If your backrest is set to 9” or 9-½” and if you are setting it to 10” to 12-½”:
a. Remove the backrest from the backrest brackets. See “Replacing the Backrest” on page 4-6.
b. Remove the backrest posts from the backrest. See Figure 4-6.
c. Install the threaded cane plugs in the bottom end of the backrest posts (see Figure 4-6) and reinstall
the backrest posts in the backrest tubes.
d. If the backrest is titanium, remove the short end plugs (see Figure 4-6) and install the long end plugs
in the bottom of the backrest tubes.
e. Align the backrest canes inside the backrest tubes so that the desired holes in the backrest canes
align with one of the top three holes in the backrest tubes. See Figure 4-8.
f.
Secure the backrest posts inside the backrest using the Allen Screws. See Figure 4-8.
g. Secure the backrest to the brackets. See “Replacing the Backrest” on page 4-6. Proceed to Step 7.
7. Reinstall the backrest upholstery and adjust the upholstery to the desired tautness. See “Velcro
®
-Style Adjustable
Back Upholstery” or “Tension Adjustable by Straps Back Upholstery” on pages 7-1 to 7-2.
Note: If your backrest is set to 10” to 12-½” and you need to adjust the backrest height, the following procedures
apply:
1. Remove the backrest upholstery. See “Velcro
®
-Style Adjustable Back Upholstery” or “Tension Adjustable by
Straps Back Upholstery” on pages 7-1 to 7-2.
2. Remove the backrest from the backrest brackets. See “Replacing the Backrest” on page 4-6.
3. If your backrest is to be set at 9” or 9-½”:
a. Remove the backrest posts from the backrest. See Figure 4-8.
b. If the backrest is titanium, remove the long end plugs in the bottom ends of the backrest and install
the short end plugs. See Figure 4-6.
c. Remove the threaded plugs in the bottom ends of the backrest posts. See Figure 4-6.
d. Reinstall the backrest posts in the backrest tubes.
e. Align the backrest posts inside the backrest so that the desired holes in the backrest posts align with
the second lowest holes in the backrest. See Figure 4-7.
f.
Secure the backrest posts inside the backrest and the backrest to the bracket using the Allen Screws
and locknuts. Note that the Allen Screws used to secure the backrest posts inside the backrest will
also serve to secure the backrest to the backrest brackets. See Figure 4-7. Proceed to Step 5.
4. If your backrest is to be set at 8-½”:
a. Remove the backrest posts from the backrest. See Figure 4-8.
b. If the backrest is titanium, make sure that the long end plugs are installed in the bottom ends of the
backrest tubes. See Figure 4-6.
c. Remove the backrest sleeve from each backrest tube. See Figure 4-6.
d. Install the top end cap in each backrest tube. See Figure 4-6.
e. Secure the backrest to the bracket using the Allen Screws. See Figure 4-9.
5. Reinstall the backrest upholstery and adjust the upholstery to the desired tautness. See “Velcro
®
-Style Adjustable
Back Upholstery” or “Tension Adjustable by Straps Back Upholstery” on pages 7-1 to 7-2.
Replacing the Backrest
Tools Needed:
• 7/16” Open End Wrench
• 5/32” Allen Wrench
1. Remove the backrest upholstery. See “Velcro
®
-Style Adjustable Back Upholstery” or “Tension Adjustable by
Straps Back Upholstery” on pages 7-1 to 7-2.
Summary of Contents for Aero R
