Ti Lite Aero R Owner'S Manual Download | Manualshive

Page: 61 / 95

background image

7-2

Aero R Owners Manual

OM_R_0809RevB

CHAPTER 7:

BACK UPHOLSTERY, SEAT UPHOLSTERY AND SEAT

CUSHIONS

Figure 7-2

Replacing Back Upholstery

Backrest Ears

Back Flap

Straps

Padded
Back

Straps

Backrest

Bottom
Flap

Figure 7-3

Adjusting Back Upholstery with Push Handles

Backrest

Backrest Ears

Back Flap

Bolts

Backrest Post
(with optional
push handle)

Tension Adjustable by Straps Back Upholstery

Note: When adjusting the tension of the back upholstery, DO NOT apply so much tension that the backrest tubes are

pulled out of vertical. If this occurs, you may cause the chair to “track” improperly or to develop a “floater.”

Adjusting the Tension

1. Lift the back flap to expose the backrest ears. See Figure 7-4.

2. Completely detach the padded back from the backrest ears. Do not remove the backrest ears from the backrest.
3. Adjust to the desired tautness by loosening the ear straps and then pulling on the loose end to pull the backrest

ears closer together. Tighter back upholstery will increase the stability and maintain normal maneuverability of
the chair because the user is pushed forward slightly. Looser back upholstery will increase maneuverability, but
will make the chair more prone to tip over backward because additional weight is being distributed onto the rear
wheels.

4. Align the top of the padded back with the two backrest ears.
5. If desired adjust the tension on the strap(s).

6. Securely attach the padded back to the backrest ears and lower the back flap back into position in front of the

rigidizer bar.

Figure 7-4

Adjusting Velcro

®

Adjustable Back Upholstery

Padded Back

Strap

Ear Straps

Backrest Ears

Back Flap

Backrest

«
...
59
60
61
62
63
...
»

Summary of Contents for Aero R
































































































Reviews:

No comments

Related manuals for Aero R

Motion Concepts Ultra Low Maxx

Brand: Invacare Pages: 100

Brand: R Healthcare Pages: 52

Brand: Quickie Pages: 23

Brand: Coopers Pages: 4

Brand: PaceSaver Pages: 40

Mustang Powered Wheelchair

Brand: Mustang Pages: 24

Brand: Rehability Pages: 28

Brand: Pride Mobility Pages: 47

Brand: Unicare Health Pages: 8

Brand: Quickie Pages: 84

Brand: Karma Pages: 40

Brand: Karma Pages: 48

Brand: Karma Pages: 52

Brand: Karma Pages: 60

Brand: Karma Pages: 64

Morgan KISS Seat

Brand: Karma Pages: 116

Brand: Karma Pages: 84

Brand: Zippie Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands