12
13
Tilt mechanism
EN
Loosen
Fasten
Using the tilt mechanism, please open the handle for
tilt mechanism and adjust the motor for the desired
position. After adjustment fasten the handle to lock
the motor.
In shallow waters use the tilt mechanism to
adjust the motor.
The motor can be tilted fully up if necessary
13
EN
Montering
Adjusting the length of the motor
Loosen the friction
screw. When this is
almost completely
unscrewed, you can
pull the motor up from
the transom mount
There are two screws
on the mounting ring.
These are loosened
and the ring is placed in
the desired place to get
the right length in
relation to the transom
of the boat. After you
have found the right
length, tightening these
two screws and put the
motor back in the
transom bracket.
Note: Remember to
tighten the friction
screw as desired.
TILT MECHANISM
ASSEMBLY
13
EN
Montering
Adjusting the length of the motor
Loosen the friction
screw. When this is
almost completely
unscrewed, you can
pull the motor up from
the transom mount
There are two screws
on the mounting ring.
These are loosened
and the ring is placed in
the desired place to get
the right length in
relation to the transom
of the boat. After you
have found the right
length, tightening these
two screws and put the
motor back in the
transom bracket.
Note: Remember to
tighten the friction
screw as desired.
EN
EN