8
Press and hold reverse button after pressing the
button you feel the vibration from the remote
Press and HOLD
the revers button for more than
5 seconds and
continue holding
the
reverse
for
the next step .
Continue to hold reverse.
press and hold
forward
button in more than 5
seconds and
continue
holding for next step
Release Reverse
button and
continue holding
the
Forward
button in more than 5 seconds
Wait until the blue light starts to flash, then release to
forward button.
Release forward button
.
Attach kill switch
and the system will boot up
and display will no light up
The remote will pair automatically
Steady blue light after remote is paired and ready.
EN
REMOTE FUNCTIONS – PAIRING
Read through all steps before you start the paring mode
The system needs to be
turned off
for the
pairing mode. (Kill switch removed)
(Kill switch needs to be in easily accessible to be used in
the last part of the pairing mode.)
x
FOLLOW THE 5 STEPS TO START THE PARING MODE AFTER THE KILL SWITCH IS REMOVED
Forward button
Revers button
If the operation is not successful, please try again
.
2
3
4
5
1.
Hole for wrist band
2.
Reverse thrust (one push = one step)
3.
Stop
4.
Forward thrust (one push = one step)
5.
Charging and indicator light, pulses while charging
To change direction you always need to push the stop button first.
NOTE
: The remote vibrates when a button is pushed
REMOTE FUNCTIONS
Remote (removable)
1
When new, the remote is paired from the factory.
The remote has a unique address and only one remote can control one system. If
the remote is lost or not connected to the system,
pairing is needed. See instructions on next page.
EN
9
REMOTE FUNCTIONS
REMOTE FUNCTIONS – PAIRING
EN
EN